Site icon Fabulous Mom Blog

Doing Toilet Repairs the Right Way

Toilet Repairs

Is there something more frightening than encountering a toilet condition that is almost overflowing? This scary monster as it crunches, bubbles, and stops working can certainly become a nightmare for all homeowners. Here are some common problems that often occur in every household’s toilet, and probably in your toilet too!

Leaking toilet. A leaky toilet can end up costing you an arm and a leg because you will pay an expensive water bill.

Even though it seems that water leakage is a small problem, it can actually turn into big trouble if it is left unaddressed properly. But you do not have to worry because this issue is usually easy to solve. First of all, you need to turn off the water valve to stop the toilet from bursting the water. Then you can wash the toilet and keep the handle to get rid of the water from the tank as much as possible.

Water from the tank does not stop flowing. Toilets that have been used for a long time generally experience this problem. If the water from the toilet tank flows continuously, it will certainly bring a lot of disadvantages to you. Your water bill can increase higher than usual, and you will probably have standing water in your bathroom. Therefore, it is essential to do the right effort to stop the water from flowing, to prevent you from another unwanted problem.

If you want to stop the continuously flowing water, you need to close the channel through the inside of the tank. However, this method might only help you to solve the issue temporary. If you apply this method you must do it every time you flush the toilet. For a permanent solution, you are required to replace the toilet drain valve.

You can get a valve at a nearest building supply store. Another solution you can do is to replace the sealant found in the valve. By replacing the water channel, it will be closed more tightly.

Watering cannot work. If you flush the toilet, and the water does not come out even though the water in the tank is filled, it can be caused by the chain that is connected to the drain valve is damaged. To overcome this problem, you need to empty the water in the tank, and then reconnect the chain. Water does not come out when flushing the toilet can occur because the flush button is loose. You must make repairs to the sprinkler button from inside the tank by turning it counterclockwise to tighten it.

Clogged toilet. If this occurs, then you need to turn off the flow of water, if your toilet is congested, don’t try to flush it or you will make the toilet overflow. Look for a water tap on the wall that is connected to the toilet flush lever and turn it clockwise until closed. Water will stop flowing to the toilet tank. However, if you are hesitant to solve your toilet problems alone, you need to contact the plumber in Sydney to get maximum and fast handling.

Read More: Transform Your Home: How to Choose the Right Roofing Type

Exit mobile version